TPI Oil pump delete kit for 2018-24 KTM / HUSKY / GAS GAS

 
 
THIS WORKS WITH OUR INJECTOR RELOCATION BLOCK ONLY.
IT'S NOT FOR USE WITH JUST STOCK TPI.   USE OF THE "SPLI KIT' IS OK.
                        If you use with just TPI, the crank will get no oil.
This kit gives you all you need to delete the stock oil pump from your TPI bike. You get the right plug, or "dongle" to keep the engine code from coming on and shutting it down. You get a cap for the throttle body oil fitting and a cap for the bottom of the oil tank.
     This allows for the whole oil pump to go.   You can now run a pre mix of 60:1, or 2 oz of oil in each gallon of gas in the tank,  without affecting the air/fuel ratio. Proof is the air/fuel read out at the bottom of the dyno chart. One run is oil injection and the other pre mix. All is identical.
     This also allows you to run a full size reed cage or any aftermarket cage, since the block won't hit the oil pump now